The warrantied Solution For Bowing & Buckling Foundation Wall Repair
What It Does:
When foundation walls begin to buckle, bow or tilt inward, homeowners are correct to be alarmed. Outside pressure from soil and water can actually cause foundation walls to collapse!
The IntelliBrace™ is a patented foundation wall repair system that’s designed to stabilize failing basement walls and provide the potential t straighten walls over time.
These steel i-beams will stabilize the wall in its current position without any further adjustment. Over time, the IntelliBrace™ System can be tightened to make bowing or tilting walls straighter.
- No outside excavation required
- Can be tightened to allow for improvement of the wall over time
- All components are zinc-coated for rust resistance
- Neat, clean appearance in the basement
- Minimal disruption of basement space
Bracing Your Bowing, Buckling Foundation Walls
When possible, we recommend repairing bowing or buckling foundation walls with SettleStop™ Wall Anchors.
However, this wall anchor system requires access to the earth outside of the foundation. Sometimes, property line issues eliminate this as an option.
When outside access is impossible, ask our foundation specialists to explain the advantages of the IntelliBrace™ System. Our experts will be able to examine your foundation and determine of this repair strategy will work for you.
The IntelliBrace™ employs a unique, patented approach to stabilizing and straightening bowed and buckled foundation walls over time.
Installing the IntelliBrace™ Wall System
The IntelliBrace™ can be installed with no disruption to outside soils or landscaping. This foundation wall system installs quickly in your home, immediately and permanently halting the inward movement of your foundation walls.
The IntelliBrace™ is a wall repair system based on strong steel I-beams. The I-beams and their support hardware have a special rust-resistant zinc coating to ensure that your system will look and perform like new for decades to come.
Our foundation experts will determine how many IntelliBrace™ supports are required for your wall repair. Before a PowerBrace™ support is installed in your home, it must be cut to size.
Based on the wall height of your basement, we will cut each beam to the appropriate height.
Next, the top of each brace is attached to a floor joist near the mudsill at the top of the wall. The specially designed bracket is bolted to the floor joist and contains a large-diameter bolt for adjusting and tightening after the installation.
A IntelliBrace™ installation will not damage your floor framing. To ensure proper performance of this wall repair system, one of our trained foundation contractors will inspect the strength of your floor joists prior to recommending this repair strategy.
The IntelliBrace™ Foundation Wall System works best when each I-beam is perfectly plumb or vertical. The contractor will use a level to fine-tune the position of each beam in preparation for the next step.
To complete the installation of your IntelliBrace™ System, each beam will be attached to your concrete foundation floor with a special, bolt-in-place bracket.
Unlike other foundation wall repair methods that install from the inside of the foundation walls, the IntelliBrace™ System spans the entire height of the foundation walls. This makes the IntelliBrace™ system suitable for repairing walls that bow and buckle from the middle.
Additionally, the IntelliBrace™ can repair walls that are sliding inwards from the bottom or tilting inwards from the top.
The IntelliBrace™ System includes a unique, patented adjustment mechanism that is unlike any other I-beam foundation wall repair system.
The bracket that anchors each I-beam to a floor joist includes a long bolt that can be tightened over time to advance the I-beam. This can force a bowed or buckled foundation wall back toward is original vertical & straight position. Straightening potential depends on several factors, including soil conditions outside the foundation.
Your Foundation Wall Repair Contractors In PA
At ITG Basements we want to help you restore your bowing, buckling, tilting, or shifting foundation walls back to their original, structurally stable condition. To help you decide if we’re the company for you, we offer free foundation wall repair quotes throughout our Pennsylvania service area.
Each of our Free Estimates includes a no-obligation written price quote and an on-site consultation.
We proudly serve Reading, Allentown, Scranton, surrounding areas such as Wilkes Barre, Bethlehem, Altoona, Harrisburg, State College, Williamsport, York, and many other parts of PA.
LET OUR FOUNDATION REPAIR EXPERTS HELPSchedule free inspection
VIEW MORE FOUNDATION REPAIR SOLUTIONS